Serverupdate") and via the pushbutton (4) of the Smart Visu Server.
In addition, it is possible to import a server update via USB stick. Corresponding manuel
steps, please refer to the separate instructions on our website.
To perform the system update using the pushbutton (5) on the device, press the button 5
times quickly in succession. If an update is available, this is then downloaded automatically
and installed. When the update has been completed, the Smart Visu Server restarts
automatically.
Figure 134: Smart Visu Server
11 Maintaining the Smart Visu Server
In case you need support, the Smart Visu Server allows remote maintenance access via
SSH server. This server is exclusively for fault analysis purposes. It allows trained JUNG
personnel to access your server to analyze the device status.
To minimize any possible security risks the remote maintenance access works only in
combination with physical access to the device. You can activate the access by pressing
the button (4) 10 times. The SSH access will automatically be deactivated after 2 hours.
Figure 135: Smart Visu Server
12 Appendix
12.1 Accessories
We recommend using one of the following KNX-IP data interfaces:
- Jung: KNX IP interface Art. no.: IPS 200 REG
- Jung: KNX IP router Art. no.: IPR 200 REG
To Next Page
Loading...
Need help?
General
