WARNING
Failure to comply with these instructions may result in damage to the
device, fire or other hazards. These instructions are a component part of
the product and must remain with the end customer. Electrical equipment
must only be installed and mounted by qualified electricians. This product
is only intended for use in dry rooms.
7.1 Correct use
- Visualisation and operation of KNX systems via terminals with HTML5-compatible
browsers, e.g. smartphone, tablet, laptop, PC etc.
- Visualisation and operation of Philips Hue systems
- Operation in local IP networks, which support DHCP (Dynamic Host Configuration
Protocol), or with fixed IP address (IPv4)
- Interior operation
7.2 Product characteristics
- Web visualisation of the KNX system for status display and operation (SV-Home)
- Integrated web-based start-up tool (SV-Control)
- Simple creation of a preconfigured operating desktop, optimised for applications at
home and in small commercial buildings
- Graphical operating elements, selection of icons from supplied libraries
- Import of group addresses (three-level) via OPC import (ETS3, ETS4, ETS5)
- Manual input of group addresses possible
- 24 areas
- 240 dynamic functions (max. 1200 datapoints)
o Switch
o Dimming
o Motor
o Climate
o Status / Value
o Website
o Webcam
o State logic
- 250 configurable actions (max. 16 functions per action)
o User-defined
o Point in time
o Event
- Connection to the KNX-BUS via KNX-IP router or KNX-IP interface
- Integration of Philips Hue systems in the KNX system
- Connection to Philips Hue via the Philips Hue Bridge
- Updateable and upgradeable
To Next Page
Loading...
Need help?
General
