Jung Smart Visu Server Series User Manual

SV- SERVER / SV-SERVER-INT 85 / 187
7.5 Structure of the device, function
Figure 67: Structure of the Smart Visu Server
(1) USB interface
For software updates and data backup
(2) Ethernet interface
For connection to the local network
(3) Power supply
Only the power supply unit from the scope of delivery
(4) Status LED
Displays the current status of the server
(5) Reset button
Reset and update
(6) Discharge protection
Remove for operation
The Status LED (4) displays the various operating statuses.
Colour of the Status LED
Function
Flashing yellow
Server booting
Flashing red
Error pending, server stopping
Continuous dimly yellow
Server and network booting
Continuous brightly yellow
Server gets IP-adress
Continuous blue
Server ready, DHCP active
Continuous green
Server ready, static network address
Flashing blue/magenta
Update operation, DHCP active
Flashing green/magenta
Update operation, static network address
The Reset button (5) triggers a reset or an update.
Reset network settings, DHCP
operation active
Press the button ≥ 5 seconds, LED flashes yellow, press the
button again briefly
Factory reset
Press the button for 20 seconds, LED flashes red, press the
button again briefly
Initialise update operation
Press the button briefly 5x
- LED turns magenta: No update available - LED flashes
magenta: Update operation

Jung Smart Visu Server Series Specifications

General

Brand	Jung
Model	Smart Visu Server Series
Category	Server
Language	English