CHAPTER 15
Cabling
IN THIS CHAPTER
Cabling the CTP2000 Platform Overview | 108
Required Tools, Wires, and Cables for the CTP2000 Platform | 109
CTP2000 Management Ports | 110
Cabling a CTP2000 T1/E1 Interface Module | 111
Cabling the CTP Platform for DC Power | 111
Cabling the CTP2000 Platform Overview
Cabling the CTP platform requires the following main tasks:
1. Familiarize yourself with the module ports, and ensure that you have the cables and wires needed to
complete each cabling procedure.
2. Read and understand all safety warnings. (See “CTP Safety Guidelines and Warnings” on page 72.)
3. Connect timing ports.
4. Connect grounding wires to the chassis.
5. Connect the power cables from the power source to the power supply.
6. Connect the interface modules to their appropriate network interface.
RELATED DOCUMENTATION
CTP2000 Serial Interface Modules | 11
CTP Cabling Recommendations | 44
Required Tools, Wires, and Cables for the CTP2000 Platform | 109
108
To Next Page
Loading...
Need help?
General
