Fast Ethernet Cables
The Ethernet connection is a standard RJ-45 connector. Typically, a straight-through cable is used to
connect to a switch, and a crossover cable is used to connect to a router.
DC Power Cables
For CTP chassis with DC power options, we recommend 18-AWG power cables.
RELATED DOCUMENTATION
Required Tools, Wires, and Cables for the CTP2000 Platform | 109
Cabling the CTP Platform for DC Power | 111
Terminal Block and Circuit Breaker Specifications | 69
Terminal Block and Circuit Breaker Specifications
Table 23 on page 69 lists the electrical specifications for the terminal block (see Figure 35 on page 70)
located on the back of the CTP2000 Series DC chassis.
Table 23: Terminal Block Electrical Specifications
SpecificationCategory
100 VDCVoltage
20 ACurrent
−55° through 105° COperating Temperature
Black thermoplastic or equivalentMaterial
Minimum: 2500 pF
Maximum: 5200 pF
Capacitance
69
To Next Page
Loading...
Need help?
General
