Juniper CTP2000 Series Hardware Guide

Figure 35: Terminal Block
g101129
.320 in. (8.13 mm)
.750 in.
(19.05 mm)
.032 in. (0.81 mm)
GROUND PLANE
.40 in.
(10.16 mm)
.650 in.
(16.50 mm)
TYP.
.213 in. (5.41 mm)
.438 in. (11.13 mm)
.312 in.
(7.92 mm)
TYP.
.562 in.
(14.28 mm)
.810 in.
(20.57 mm)
.415 in.
(10.50 mm)
#6—32UNC—2A THD
COMBO HD. SCREW
SCI
52—160—002—A
XXXX — DATE CODE
o.190
2 PL
.062 in. (1.57 mm) .004 in.
TYP.
.27 in. (6.86 mm)
MARKING
1.738 in.
(44.17 mm)
1.312 in.
(33.35 mm)
.031 in. .002 in.
(.79 mm) TYP.
Table 24 on page 70 summarizes the electrical specification for the circuit breaker that is attached on the
back of the CTP2000 Series DC chassis.
Table 24: Circuit Breaker Specification
SpecificationPlatform
8 ACTP2008-DC
15 ACTP2024-DC
15 ACTP2056-DC
RELATED DOCUMENTATION
Required Tools, Wires, and Cables for the CTP2000 Platform | 109
Cabling the CTP Platform for DC Power | 111
CTP Fast Ethernet and Power Cables | 68
70

Juniper CTP2000 Series Specifications

General

Brand	Juniper
Model	CTP2000 Series
Category	Network Hardware
Language	English