Safety Warnings
For your safety, before installing the device, review all safety warnings in this section.
WARNING: The recommended maximum ambient temperature is 40° C
(104° F). For safe operation take into consideration the internal temperature
within the rack.
WARNING: Install equipment in the rack from the bottom upward. Doing this
helps maintain the stability of the rack and reduces the chance of the rack
tipping over.
WARNING: Do not insert any metal object, such as a screwdriver, into an
open slot or the backplane. Doing so can cause electric shock and serious
burns.
WARNING: Three people are required to install the device in a rack: two to
lift the device into position and one to screw it to the rack.
WARNING: Connect the device or rack to ground (earth), and ensure that a
reliable grounding path is maintained in the rack.
WARNING: Do not work on the device or connect or disconnect cables during
lightning activity.
WARNING: Be sure that circuit breakers for the power source are in the OFF
position before attaching power cables.
WARNING: Before servicing the device, turn off the power.
WARNING: Remove jewelry (including rings, necklaces, and watches) before
working on equipment that is connected to power lines. Metal objects heat
up when connected to power and ground and can cause serious burns or
become welded to the terminals.
21Copyright © 2019, Juniper Networks, Inc.
Safety Warnings
To Next Page
Loading...
Need help?
General
