Juniper J-Series Administration Guide

About This Guide
This preface provides the following guidelines for using the J-series™ Services Router
Administration Guide:
■ Objectives on page xv
■ Audience on page xv
■ How to Use This Guide on page xvi
■ Document Conventions on page xvii
■ Related Juniper Networks Documentation on page xviii
■ Documentation Feedback on page xxi
■ Requesting Technical Support on page xxi
Objectives
This guide contains instructions for managing users and operations, monitoring
network performance, upgrading software, and diagnosing common problems on
J-series Services Routers.
J-series Services Router operations are controlled by the JUNOS software. You direct
the JUNOS software through either a Web browser or a command-line interface (CLI).
NOTE: This guide documents Release 9.1 of the JUNOS software. For additional
information about J-series Services Routers—either corrections to or omissions from
this guide—see the J-series Services Router Release Notes at http://www.juniper.net.
Audience
This guide is designed for anyone who installs and sets up a J-series Services Router
or prepares a site for Services Router installation. The guide is intended for the
following audiences:
■ Customers with technical knowledge of and experience with networks and the
Internet
■ Network administrators who install, configure, and manage Internet routers but
are unfamiliar with the JUNOS software
■ Network administrators who install, configure, and manage products of Juniper
Networks
Objectives ■ xv

Juniper J-Series Specifications

General

Brand	Juniper
Model	J-Series
Category	Network Router
Language	English