Juniper J-Series Administration Guide

Table 63: Summary of Key CoS Scheduler Maps Output Fields (continued)
Additional InformationValuesField
Delay buffer size in the queue or the amount
of transmit delay (in milliseconds). The
buffer size can be either of the following:
■
A percentage—The buffer is a
percentage of the total buffer
allocation.
■
remainder—The buffer is sized
according to what remains after other
scheduler buffer allocations.
Buffer Size
Scheduling priority of a queue:
■
high—Packets in this queue are
transmitted first.
■
low—Packets in this queue are
transmitted last.
■
medium-high—Packets in this queue are
transmitted after high-priority packets.
■
medium-low—Packets in this queue are
transmitted before low-priority packets.
Priority
Name and index of a drop profile that is
assigned to a specific loss priority and
protocol pair.
Drop Profiles
Packet loss priority corresponding to a drop
profile:
■
low—Packet has a low loss priority.
■
high—Packet has a high loss priority.
■
medium-low—Packet has a medium-low
loss priority.
■
medium-high—Packet has a
medium-high loss priority.
Loss Priority
Transport protocol corresponding to a drop
profile.
Protocol
Name of the drop profile.Drop Profile Name
Monitoring MPLS Traffic Engineering Information
The J-Web interface provides information about Multiprotocol Label Switching (MPLS)
traffic engineering.
This section contains the following topics:
■ Monitoring MPLS Interfaces on page 131
■ Monitoring MPLS LSP Information on page 131
■ Monitoring MPLS LSP Statistics on page 132
130 ■ Using the Monitoring Tools
J-series™ Services Router Administration Guide

Juniper J-Series Specifications

General

Brand	Juniper
Model	J-Series
Category	Network Router
Language	English