Juniper J2320 User Manual

Displaying Basic Connectivity Configurations
Purpose Verify the configuration of basic connectivity. Because the basic connectivity settings
appear in different places in the configuration hierarchy, displaying the entire
configuration at once makes viewing the settings easier.
Action From the J-Web interface, select
Configuration>View and Edit>View Configuration Text. Alternatively, from
configuration mode in the CLI, enter the show command. The following sample output
displays the sample values configured in Table 57 on page 146. Your output displays
the values you set.
system {
host-name routera;
domain-name lab.router.net;
domain-search [ lab.router.net router.net ];
backup-router 192.168.2.44;
time-zone America/Los_Angeles;
root-authentication {
ssh-rsa "ssh-rsa AAAAB3Nza...D9Y2gXF9ac==root@routera.lab.router.net";
}
name-server {
10.148.2.32;
}
services {
}
ntp {
server 10.148.2.21;
}
}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
lo0 {
unit 0 {
family inet {
address 172.16.1.24/32;
}
}
}
}
What It Means The output shows the configuration of basic connectivity. Verify that the values
displayed are correct for your Services Router.
See Also For more information about the format of a configuration file, see the J-series Services
Router Basic LAN and WAN Access Configuration Guide.
Displaying Basic Connectivity Configurations ■ 149
Chapter 7: Establishing Basic Connectivity

Juniper J2320 Specifications

General

Brand	Juniper
Model	J2320
Category	Network Router
Language	English