• Other querier present interval—Time that the interface waits before declaring itself
as the querier
• Maximum response time—Time interval during which this interface expects a host
to respond
• Graceful restart—Status of graceful restart: active or complete
• Last member query interval—Time that this interface waits before sending a new
query to a host that sends a group leave message
• Robustness—Number of times this interface sends MLD messages
• Information about IPv6 access lists configured with the ipv6 mld access-group
command
• Inbound access group—Access list specified
• No inbound access group—No access list specified
• Information about IPv6 access lists configured with the ipv6 mld
access-source-group command
• Inbound access source-group—Access list specified
• No inbound access source-group—No access list specified
• Information about OIF maps configured with the ipv6 mld apply-oif-map command
• Inbound apply-oif-map—Map name specified
• No inbound apply-oif-map—No map name specified
• Immediate Leave—Setting of the ipv6 mld immediate-leave command: enabled or
disabled
• Explicit Host Tracking—Setting of the ipv6 mld explicit-tracking command: enabled
or disabled
• Max-Group limit—Number of MLD groups that the interface can accept, as configured
with the ipv6 mld group limit command
• Group Count—Number of MLD groups that the interface has accepted
• IOA packet replication—Hardware multicast packet replication interface to which
egress multicast packets on this interface are redirected
• Interface statistics Rcvd—Information about MLD messages received on this interface
• reports—Number of group multicast listener reports received
• leaves—Number of group multicast listener done messages received
• wrong version queries—Number of multicast listener queries received from devices
running a different version of MLD
Copyright © 2010, Juniper Networks, Inc.194
JunosE 11.2.x Multicast Routing Configuration Guide
To Next Page
Loading...
Need help?
General
