7
English |
Digital Radio
Continued on the next page...
Digital Radio Setup
1 Touch [ ].
2 Set each item as follows.
[Service List]
Displays the Service List screen.
• [
] : Touch and then touch [Yes] to find the latest
service list.
[TI]
Switches to the traffic information automatically
when the traffic bulletin starts.
“ON”, “OFF” (Default)
[PTY]
Searches for a program by program type.
[Priority]
If the same service is provided by Radio Data System
when reception of the service being provided by
Digital Radio becomes poor, automatically switches
to Radio Data System.
“ON”, “OFF” (Default)
[Announcement Select]
Switches to the set Announcement service.
[Related Service]
When you select ON, the unit switches to a related
service (if exists) when a DAB service network is not
available. Default is “OFF”.
[Antenna Power]
Sets power supply to the Digital Radio antenna. Set
to “ON” when the Digital Radio antenna in use is
equipped with a booster. Default is “ON”.
3 Touch [6].
Ñ Announcement setup
When the service for which ON is selected starts,
switches from any source to Announcement to
receive it.
1 Touch [Announcement Select] in the DAB
SETUP screen.
2 Touch each Announcement list and set on or
off.
19DMX_E_Ref_1En.indd 7 2019/07/23 21:04
To Next Page
Loading...
Need help?
General
