JVC In-Dash DVD Player KD-LX50R User Manual

20
ENGLISH
CD OPERATIONS
Playing a CD
Current track
Elapsed
playing time
Total playing time of
the inserted disc
Total track number
of the inserted disc
1
Open the loading slot.
The display panel moves down, and the loading slot appears.
2
Insert a disc into the loading slot.
The unit draws a CD, the display panel moves up, and CD play starts
automatically.
Notes:
• When a CD is in the loading slot, selecting “CD” as the source by pressing SOURCE (ATT) starts
CD play.
• When a CD is inserted upside down, “DISC EJECT” appears on the display and the CD automatically
ejects.
• When you play a CD Text, the disc title and performer appear on the display. Then the current track
and elapsed playing time appear on the display. See also “Playing a CD Text” (page 21) and “To
select the scroll mode” (page 54).
If a CD Text includes much text information, some may not appear on the display.
• If you change the source, the CD play stops (without ejecting the CD).
To stop play and eject the CD
Press OFF/0 briefly.
CD play stops, the display panel moves down, then the CD automatically ejects from the loading
slot.
To move up the display panel, press
¢ or 4 .
CAUTION: NEVER insert your finger between the display panel
and the unit, as it may get caught in the unit.
Note:
If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into the
loading slot to protect it from dust. (CD play will not start this time.)
1
¢
4
EN20-24.KD-LX50R[E]/f 00.3.22, 10:35 AM20

JVC In-Dash DVD Player KD-LX50R Specifications

General

Brand	JVC
Model	In-Dash DVD Player KD-LX50R
Category	Car Receiver
Language	English