4
INITIAL SETTINGSINITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the
<Settings> screen. (Page57)
1 Perform the initial settings.
<Demonstration>
(Page59)
Activate or deactivate the
display demonstration.
<Language>
(Page60)
Select the text language
used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
<Rear Camera>
(Page36)
Configure the settings to
display the picture from
the connected rear view
camera.
<User
Customize>
(Page53)
Change the display design.
<Viewing Angle>
(Page59)
Select the viewing angle
in relation to the monitor
panel to make the panel
easier to see.
2 Finish the procedure.
The Home screen is displayed.
Clock settings
1 Display the Home screen.
On the monitor panel:
KW-V330BTKW-V230BT
KW-V235DBT
2 Display the <Settings> screen.
KW-V330BTKW-V230BT
KW-V235DBT
3 Display the <System> setting screen.
4 Display the <Clock> screen.
• You can also display the <Clock> setting
screen by touching the clock area on the
Home screen.
2017KW-VEntryE.indb42017KW-VEntryE.indb4 2016/09/2717:402016/09/2717:40