Using timer-record
1
2
3
4
5
6
7
Display the menu
Select “DTV”
Select “Timer”
Switch to digital
channels
Select an item
Reserve a
programme
to record
Record
Reserve a
programme to
watch
Remind
1 select
2 next
1 select
2 next
DTV original function and setting, such as a recorder-linked timer-record setting,
can be selected from the DTV menu.
Switch TV / RADIO
(red)
1 select
2 next
Cancel a reservation
Select the reservation. Press “ ”. Select “Yes” and
press “OK” button.
Change a reservation
Select the reservation and press “OK”.
Up to 20 programmes can be
reserved.
Search a channel using EPG
Press “ ”
Select the channel
Enter the time and date with number buttons
Select the reservation mode (Once / Daily / Weekly)
Normally set to “PCM” (PCM / Analogue, Dolby Digital) (P. 56)
Set subtitle recording (Off / On)
Lock the recording with the maturity rating (Lock / Unlock)
A message will be displayed if there is problem with the reservation.
In the following cases, enter the PIN code “When entering the PIN Code” (P. 36)
· When changing the “Maturity Rating”
· When reserving a channel which is set to “Lock” (P. 45)
· Set the recording device to external input mode before the start time.
· Manually set the timer on “T-V LINK” incompatible devices. For details, refer to the device’s manual.
· Make sure that recording times on the recording device do not overlap with recording times on the TV.
· Some “T-V LINK” compatible DVD recorders may not work correctly.
When Rec Timer has been set, the power lamp on the TV will :
Start blinking 3 minutes before the start time (green or red)
Light during recording (green or orange)
TV programme
Radio programme
A message will be displayed if there is problem with the reservation.
If you reserved the programme using EPG, the screen will return to EPG instead.
Step 3 in “Timer” (P. 20)
(blue)
Set “Timer”
Prepare for recording
1
Input / confirm timer-record settings
TV programme
Radio programme
At the start time, the channel will
automatically change and the
device connected to “EXT-2” will
begin recording the programme.
(red)
Set
2
3
Set
1
Input / confirm timer-record settings
2
If you reserved the programme using EPG, the screen will return to EPG instead.
Step 3 in “Timer” (P. 20)
Select the channel
Enter the time and date with number buttons
Select the reservation mode (Once / Daily / Weekly)
If the TV’s power is off at the
start time, nothing happens.
At the start time, the channel will
automatically change.
(green)
(yellow)
: When “Maturity Rating” is set
to “Unlock”
To the previous
screen
Exit
To Next Page
Loading...
Need help?
General
