Initial settings
Set the menu language, installation location and automatically register the TV channels.
These channels can be edited later in “Editing channels” (P. 11).
(Channel data on the TV can be sent to a connected
recording device that is compatible with “T-V LINK”.)
To the previous screen
If the “JVC” logo does not appear or
if you wish to make changes later
“LANGUAGE” and “AUTO PROGRAM”
(P. 26)
Exit
MENU
BACK
TV
What is “T-V LINK”?
Connecting the TV to a “T-V LINK”
compatible device allows :
Channels on the TV to be instantly
registered on the device.
The “DIRECT REC” function to be
used.
“Technical information” (P. 32)
“T-V LINK” variations
“T-V LINK” (JVC) “Q-LINK” (Panasonic)
“Megalogic” (Grundig) “Data Logic” (Metz)
“SMARTLINK” (Sony) “Easy Link” (Philips)
Select a language
Select the country of installation
Automatically register channels
Check what was registered
select
1 select
For the next page
Edit channels
⁄ in “Editing channels”
(P. 11)
When not using “T-V LINK”
When using “T-V LINK”
If “FEATURE NOT
AVAILABLE” appears :
Is the “T-V LINK” compatible
device connected to “EXT-2”?
Is the device turned on?
Finish
3
2
5
6
Confirm
(Blue)
2 next
(Yellow)
Begin
Shown only when
powering on for the first time.
The power on the unit can also be used.
1
4
To Next Page
Loading...
Need help?
General
