EasyManuals Logo
Home>JVC>Speaker System>MX-D302T

JVC MX-D302T User Manual

JVC MX-D302T
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
25
8. Press the 8 SET button.
The volume level blinks on the display.
9. Press the SELECT 5 + or 4 – button
to set the volume level.
10.
Press the 8 SET button.
The display returns to the display before you set the timer.
Before Turning the Unit Off
Check that the selected source is ready.
If you will be recording a source while you are out, set the volume to 0.
To turn the Timer off, press the 2 TIMER button after pressing the SHIFT button. The Timer indicator
on the display goes out.
Setting the Sleep Timer
Use the Sleep Timer to turn the Unit off after a certain number of minutes when it is playing. By setting
this timer, you can fall asleep to music and know your Unit will turn off by itself rather than play all
night.
o You can only set the Sleep Timer when the Unit is on and a source is playing.
To set the Sleep Timer, follow this procedure:
1. With the System on and a source
playing, press the SLEEP button
on the Remote Control.
2. Set the length of time you want the source to play before shutting
off.
Each time you press this button,the number of minutes shown on the display changes as follows:
= 10 = 20 = 30 = 60 = 90 = 120 = Canceled = (back to the beginning)
When the number of minutes you want are shown on the display, just wait 5 seconds until the number of
minutes stops blinking and remains lit.
The Unit is now set to turn off after the number of minutes you set.
To Change the Sleep Timer Setting
Press the SLEEP button until the number of minutes you want appears on the display.
To Cancel the Sleep Timer Setting
Press the SLEEP button until the SLEEP indicator goes off on the display.
Turning off the Unit also cancels the Sleep Timer.
8
SET
45
– SELECT +
8
SET
SLEEP
A.BASS EX S.MODE
SLEEP
EN.MX-D302T[J]/f 98.1.13, 5:06 PM25

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC MX-D302T and is the answer not in the manual?

JVC MX-D302T Specifications

Amplifier Section IconAmplifier Section
output power55 watts per channel
input sensitivity300 mV
input impedance50 kohms
Cassette Deck Section IconCassette Deck Section
frequency response Type II50 - 14, 000 Hz
frequency response Type I50 - 14, 000 Hz
wow and flutter0.15% (WRMS)
CD Automatic Changer Section IconCD Automatic Changer Section
cd capacity3 discs
dynamic range85 dB
signal-to-noise ratio90 dB
Tuner Section IconTuner Section
fm tuning range87.5 - 108.0 MHz
am tuning range530 - 1, 710 kHz
dimensions265 × 315 × 340 mm
Speaker Specifications IconSpeaker Specifications
tweeter size5 cm
woofer size12 cm
power handling capacity60 W
Power Specifications IconPower Specifications
power requirementsAC 120 V, 60 Hz
power consumption95 watts
standby power consumption9 watts
Weight and Dimensions IconWeight and Dimensions
dimensions265 × 315 × 340 mm
mass7.2 kg
speaker dimensions215 × 315 × 230 mm

Related product manuals