30
Specifications
Amplifier Section
Output Power 55 watts per channel, min. RMS at 6 ohms at 1 kHz,
with no more than 3% total harmonic distortion.
Input Sensitivity/Impedance (1 kHz)
AUX 300 mV/50 kohms
Speaker terminals 6 - 16 ohms
Cassette Deck Section
Frequency Response
Type II (CrO
2
) : 50 - 14,000 Hz
Type I (NORMAL) : 50 - 14,000 Hz
Wow And Flutter 0.15% (WRMS)
CD Automatic Changer Section
CD Capacity 3 discs
Dynamic Range 85 dB
Signal-To-Noise Ratio 90 dB
Wow And Flutter Unmeasurable
Tuner Section
FM Tuner
Tuning Range 87.5 - 108.0 MHz
AM Tuner
Tuning Range 530 - 1,710 kHz
Dimensions 265 × 315 × 340 mm (W/H/D)
(10-7/16 × 12-7/16 × 13-7/16 inches)
Mass 7.2 kg (15.9 lbs)
Speaker Specifications
SP-D302
Type 2-way, 2-speaker bass-reflex type
Speaker
Tweeter 5 cm (2 inches) cone × 1
Woofer 12 cm (4-3/4 inches) cone × 1
Power Handling Capacity 60 W
Impedance 6 ohms
Frequency Range 50 Hz - 20,000 Hz
Sound Pressure Level 90 dB/w • m
Dimensions 215 × 315 × 230 mm (W/H/D)
(8-1/2 × 12-7/16 × 9-1/16 inches)
Mass 3.3 kg (7.3 lbs)
Accessories
AM Loop Antenna (1)
Remote Control (1)
Batteries R6P (SUM-3)/AA (15F) (2)
FM Wire Antenna (1)
Power Specifications
Power Requirements AC 120 V , 60 Hz
Power Consumption 95 watts
9 watts (in standby mode)
Design and specifications are subject to change without notice.
VICTOR COMPANY OF JAPAN, LIMITED
J
V
C
0198TNMNATJEM
EN
EN.MX-D302T[J]/f 98.1.13, 5:06 PM30
To Previous Page
Loading...
Need help?
Amplifier Section
Weight and Dimensions
