EasyManuals Logo
Home>JVC>Speaker System>NX-T10

JVC NX-T10 User Manual

JVC NX-T10
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
22
For other audio signals than 5.1 channels
NATURAL
The System reproduces the sound as follows:
• Left channel sound: From the speaker
units on the top and front of the left
speaker
• Right channel sound: From the speaker
units on the top and front of the right
speaker
Dolby Pro Logic II is deactivated when this
mode is selected.
PL MOVIE
PL MUSIC
Dolby Pro Logic II Movie (PL MOVIE) or
Dolby Pro Logic II Music (PL MUSIC) is
activated.
When “PL MOVIE” or “PL MUSIC” is
selected,
indicator lights on the
display.
SURR OFF
Stereo sound is reproduced from the speaker
units on the front of the speakers.
For FM/AUDIO IN
NATURAL
The System reproduces the sound as follows:
• Left channel sound: From the speaker
units on the top and front of the left
speaker
• Right channel sound: From the speaker
units on the top and front of the right
speaker
Dolby Pro Logic II is deactivated when this
mode is selected.
SURR OFF
Stereo sound is reproduced from the speaker
units on the front of the speakers.
Subwoofer is always activated to reproduce the bass sound.
Daily Operations—Sound & Other Adjustments
Turning Off the Sound in a
Moment
Remote
ONLY
To restore the volume, press again, or
adjust the volume level.
Adjusting the Sound
INFO
Remote
ONLY
To activate the surround mode
For Disc/USB/HDMI 1/HDMI 2/DGTL IN
For a 5.1 channel digital audio signal (Dolby Digital or DTS
Digital Surround)
The surround mode appropriate for the audio signal is
automatically activated.
or indicator lights on the display.
When the System reproduces a 5.1 channel digital audio
signal, each channel is reproduced as follows:
Front channels: Reproduced from the speaker units on
the front of the speakers.
Center channel: Reproduced from the speaker units
on the front of the speakers, half from the left speaker
and half from the right speaker.
Surround channels: Reproduced from the speaker
units on the top of the speakers.
If you press SURROUND to set the surround mode to
“SURR OFF,” the audio signal is down-mixed into 2
channels and reproduced only from the speaker units on
the front of the speakers.
Remote control
EN_NX-T10[UG]_CS2.indb 22EN_NX-T10[UG]_CS2.indb 22 09.12.14 9:53:16 PM09.12.14 9:53:16 PM

Other manuals for JVC NX-T10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC NX-T10 and is the answer not in the manual?

JVC NX-T10 Specifications

General IconGeneral
BrandJVC
ModelNX-T10
CategorySpeaker System
LanguageEnglish

Related product manuals