EasyManuals Logo
Home>JVC>Speaker System>NX-T10

JVC NX-T10 User Manual

JVC NX-T10
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
30
Before You Start Recording
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
The recording level is not affected by the volume.
Surround mode effect, tone adjustment, and the speaker
level settings (see pages 22, 23, and 42) do not affect
recordings.
Random Play and Repeat Mode are canceled during
recording mode.
You can record up to 99 tracks per group to the USB
device.
Tracks which are recorded to the USB device will be
converted into MP3 format.
You cannot start recording into a USB device while
“READING” is shown on the display.
You cannot record tracks in the root group as much as
into other groups. This is not a malfunction. It depends
on the USB device used.
Do not disconnect a USB device while playing/recording.
It may cause malfunction.
About SCMS (Serial Copy Management System)
The System uses the Serial Copy Management System
which allows only first-generation digital copies to be made
of premastered software such as regular CDs.
If you try to record from a duplicated CD-R or CD-RW
into the USB device, “SCMS VLT (violation)” appears on
the display.
Recording Operations
INFO
Remote control
1st generation
2nd generation
EN_NX-T10[UG]_CS2.indb 30EN_NX-T10[UG]_CS2.indb 30 09.12.14 9:53:21 PM09.12.14 9:53:21 PM

Other manuals for JVC NX-T10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC NX-T10 and is the answer not in the manual?

JVC NX-T10 Specifications

General IconGeneral
BrandJVC
ModelNX-T10
CategorySpeaker System
LanguageEnglish

Related product manuals