39
Remote control
Setting Up Playback of Discs/
USB Devices/HDMI Devices
Remote
ONLY
You can change the settings of playback of discs/USB mass
storage class device/HDMI devices connected to HDMI IN
1 or 2 with the Setup menu on the TV.
• The Setup menu can be used only when “DVD/CD,”
“USB,” “HDMI 1,” or “HDMI 2” is selected as the source.
1 Press SET UP.
The Setup menu appears on the TV and playback is
paused.
2 Press 3 (or 2) to select the menu.
3 Press ∞ (or 5) to move to select the item.
4 Press ENTER.
5 Press ∞ (or 5) to select the options, then press
ENTER.
To exit from the Setup menu
Press SET UP.
Menu Item Contents
SCREEN SAVER You can set the SCREEN SAVER function (ON or OFF). If no operation is done
for about 3 minutes, the TV screen becomes dark.
TV TYPE
16:9 4:3 LB
4:3 PS
You can select the monitor type to match your TV when you play back pictures
recorded for wide-screen televisions.
4:3 PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed
in to fill the screen vertically and the left and right sides of the picture are cut off.
4:3 LB (Letter Box conversion): For a conventional (4:3) TV. Displays a wide-
screen picture to fit the width of the TV screen keeping the aspect ratio.
16:9 (Wide-screen television): Select this when the aspect ratio of your wide-
screen TV is 16:9.
PASSWORD You can prohibit operations used for changing the RATING setup. Enter a four-
digit password. We recommend that you write your password here for your
reminder.
Password:
&&&&
If you forget your password, you can release it by entering 0000.
RATING
You can set playable rating level with the System.
EXIT SETUP
Exits from the Setup menu.
Setup Menu Operations
INFO
TV TYPE
PASSWORD
RATING
EXIT SETUP
SCREEN SAVER
Number
buttons
EN_NX-T10[UG]_CS2.indb 39EN_NX-T10[UG]_CS2.indb 39 09.12.14 9:53:27 PM09.12.14 9:53:27 PM
To Next Page
Loading...
Need help?
General
