JVC NX-T10 User Manual

32
On-Screen Bar Operations
Remote
ONLY
You can check the source information (disc/USB mass
storage class device) and playback status in the on-screen
bar.
To display the on-screen bar
Ex.: For DVD Video
1 Disc/source
2 Current title number/Total title number
3 Current chapter number/Total chapter number of the
current title
4 Time indication
To change the indication of the on-screen bar
Each time you press and hold DISPLAY for more than 3
seconds, the on-screen bar changes as follows:
Ex.: For DVD Video
* It does not appear when an MP3/WMA/JPEG/MPEG-1/
MPEG-2/DivX file is played back.
• For Audio CD, the on-screen bar automatically appears
on the TV when playback is started.
• The time indication on the display of the main unit also
changes according to the time indication on the on-
screen bar.
• The indication on the on-screen bar differs depending on
the type of disc/file.
The following information is displayed on the on-screen
bar. Items displayed depend on the types of disc or file.
TT
Title
CH
Chapter
TRK
Track
Time indication
Audio language
Subtitle language
Angle
D
/
DTS
/
LPCM
Audio format
Repeat mode
PBC
Playing back a disc with PBC
On-Screen Operations
Remote control
Number
buttons
12 3 4
TT
DVD
CH 3/61/7 0 0:00:41
TT
DVD
CH 3/61/7 0 0:00:41
TT
DVD
CH 3/61/7 0– 0:04:14
TT
DVD
CH 3/61/7 0– 0:44:14
TT
DVD
CH 3/61/7 0 1:14:41
Elapsed playing time of the
current chapter/track/file
1 / 3 ENG 1 / 3 ENG OFF5.1CH
When a DVD Video/DVD-VR is played back, the
current chapter information appears on the on-
screen bar. The information differs depending
on the disc.
Remaining playing time
of the current chapter/
track/file
Total playing time of
the title/disc*
Total remaining playing
time of the title/disc*
On-screen bar disappears.
EN_NX-T10[UG]_CS2.indb 32EN_NX-T10[UG]_CS2.indb 32 09.12.14 9:53:22 PM09.12.14 9:53:22 PM

JVC NX-T10 Specifications

General

Brand	JVC
Model	NX-T10
Category	Speaker System
Language	English