Advancedoperations
4 Press ENTER.
5 Press Cursor T/A to change the
setting.
6 Press ENTER.
The current VFP settings appear again.
I Repeat steps 3 to 6 to adjust other
parameters.
8 Press VFP.
NOTE
• Allhough lhe selting display disappears in Ihe middle of tile
procedure, lhe selling at Ihal lime will be slored.
• While stopped
1 Press PLAY MODE repeatedly until
program window appears on the TV
screen.
USENUNE}:{ICKEYSTOPNOGNAN TRACKS,
USECANCELTO DELETEI'NEPROGRAN.
See page 26 for button locations. I
2 Follow the instructions that appears on
the TV screen to program the desired
chapters/tracks.
• For details on using the number buttons, see "How to use the
number buttons" (-" pg. 25).
• The content's numbers that you have to specify for
programming varies depending on the disc type:
• DVD VIDEO: Titles and chapters
• VCD, SVCD, CD: Tracks
• DVD AUDIO, MP3, WMA:
Groups and tracks
• Bet%re you program the tracks in bonus group on a DVD
AUDIO, perform the procedure of "Playing back a bonus
group" (-" pg. 25) to turn off the BONUS indicator on the
display window.
• You can specify the chapters/tracks whose number is tip to
99.
• There may be a case that the group or title number can be
entered even for discs that contain no groups or titles. In
such a case, press ENTER to proceed to the Track/Chapter
colunnl.
• When you press ENTER instead of the number buttons in
the Track/Chapter column, "ALL" appears and all the tracks
or chapters on the selected group or title are programmed as
a step.
To clear the programs one by one from the last
entered number
Press CANCEL repeatedly.
To clear all programs
Press •.
You can also clear the program by turning off the system.
3 Press =,-(play button).
If all of the programmed tracks/files have been played back,
playback stops and the program window appears again. Note
that program setting remains.
To check the program contents
During playback, press II. Playback stops and the program window
appears.
To quit the Program mode
While stopped, press PLAY MODE repeatedly until both program
window and disappear from the TV screen.
NOTE
• There may he a case where bonus group uu a DVD AUD10 cannot be
played.
• The Resume function cannot be used with Program Playback.
• Program Playback may not work R_rsome discs.
34
To Next Page
Loading...
Need help?
General
