Connections This Paoeisfor [TH-M606] ITH-M6031
The following procedure explains the front speaker assembly. The
assembly of both the front and snrround speakers are done in the
salne manner.
2
Copper
Silver
Front speaker Surround speaker
(x2) (×2)
Stand (x4)
Base plate (x4)
NOTE
• Thestandsand thebaseplatesarecommonly usedt'orboth front and
snrronnd speakers assenlbly.
Before assembling --
• Prepare a Phillips screwdriver (not supplied).
• Take care not to drop the base plate while assembling; otherwise,
it may cause damage to the floor or injury.
Base plate
Speaker cord
3
Speaker
Stand ......
Completion
Screw M5 x 25 mm (1 inch) (supplied)
Black
with stand without stand
• You can route the speaker cords through one on the three
grooves on the base plate depending on the speaker layout.
• Depending on the installing condition, you can assemble the
front and surround speakers without the stands. In such a
case, attach the speaker directly to the base plate instead of
the stand.
9
To Next Page
Loading...
Need help?
General
