Connections This page is for [TH-M606]
Before connecting the speaker cords;
Twist and pull the insulation coat off and remove.
Powered subwoofer
SP-PWM606
Speaker cord (supplied)
• Connect the silver cords to the black (0) terminals.
• Connect the copper cords to the (_) terminals referring to the
table below:
FRONT SPEAKERS (RIGHT)
FRONT SPEAKERS (LEFT)
CENTER SPEAKER
SURROUND SPEAKERS (RIGHT)
SURROUND SPEAKERS (LEFT)
Red
White
Green
Gray
Blue
Front speakers
SP-THM606F
i B
FRORT
SPEAKERS
go ow
4 m (13 feet)
i
CEBTER SURROUND
SPEAKER SPEAKERS
2
w _ r_ J
10 m (33 feet)
Surround speakers
SP-THM606S
CAUTION
• When you connect speakers other than the supplied ones, use
speakers with the same speaker impedance (SPEAKER
IMPEDANCE) indicated near the speaker terminals on the rear of
the powered subwoo]er.
• DO NOT connect more than one speaker to one speaker terminal.
.. Black
Continued on next page
lo
To Next Page
Loading...
Need help?
General
