Connections This pageisfor ITN-N6O3]
Before connecting the
speaker cords;
Twist and pull the insulation coat
off and remove.
Powered subwoofer
SP-PWM603
Jill \1|
Speaker cord (supplied)
• Connect the silver cords to the black (@) terminals.
• Connect the copper cords to the (@) terminals referring to the table below:
FRONT SPEAKERS (LEFT) White
FRONT SPEAKERS (RIGHT) Red
CENTER SPEAKER Green
SURROUND SPEAKERS (LEFT) Blue
SURROUND SPEAKERS (RIGHT) Gray
Center speaker
SP-THM606C
Front speakers
SP-THM606F
ZZ
3w oK
4 rn (13 feet)
_E_T_a
SP£AKER
...........
Z
O_
rg_l
10 rn (33 feet)
i
i
Surround speakers
SP-THM606S
CAUTION
• When you connect speakers other than the supplied ones, use
speakers with the same speaker impedance (SPEAKER
IMPEDANCE) indicated near the speaker terminals on the rear of
the powered subwoolcr.
• DO NOT connect more than one speaker to one speaker terminal.
11
To Next Page
Loading...
Need help?
General
