To Next Page

To Previous Page

Note

Depending on the material of your mounting surface, you may

require different screws and anchors than those supplied.

Note

If tilt angle is less than 20 degrees from the horizontal, the image

can flash by reflection of IR-LED light. Keeping tilt angle over 20

degrees is recommended when IR-LED light is used.

Locking the Camera

 Use soft, lint -free cloth to wipe the dome cover clean and remove fingerprints.

 Attach the inner liner and camera housing.

 Turn the power on after you have installed the camera.

This mounting kit

is optional

accessory.

JVC VN-T216VPRU User Manual

Other manuals for JVC VN-T216VPRU