44
Network Settings
Basic
Basic
Figure 4-30 Network basic
Network
IP Address: Input your IP address here when you select “Manual”.
Subnet Mask: Please use default number: 255.255.255.0. If the subnet
mask is not properly configured, the camera may not be able to communicate
with other devices on the network.
Default Gateway: It is unnecessary to enter Default Gateway if it is not
used. Ask your Network Administrator for Default Gateway information.
Primary DNS: (same as above)
Secondary DNS: (same as above)
Live Stream
Protocol: This is used by Live View.
Users can select TCP or Http protocol.
Port
Port: This is Http port number of WEB server in the camera. When Http is
selected for Live Stream Protocol, Live View also uses the port number. We
recommend using the default port; if you need to change the default port,
please contact your system administrator. Options: 1025 to 65535 (80 is the
default). After changing the port number, enter URI with the port number to IE.
( Example: 192.168.0.2:8080 ).
Https: This is Https port number. We recommend using the default Https.
If you need to change the default Https, please contact your system
administrator. Options: 1025 to 65535 (443 is the default).
To Next Page
Loading...
Need help?
General
