48
Admin Function
Administrator
Press the item-Administrator Function on setting menu. You can setup system
password.
The default setting for system Admin ID and password is:
User ID: admin
Password: jvc
Language: English
You can enter your own Admin ID and password at this field.
Figure 4-36 Administrator
Please click the “Save” button to save your settings. You can also
click the left button “Reset to Default” to set all the data and
options as defaults.
User List
Besides administrator, guests can access the camera under authorization from
system administrator by ID and password controller. However, User1~5 are
allowed to review the live picture only. Without authorization, any operation will
be forbidden.
The default guest’s login name and password are “user” and “jvc”.
Enter a guest’s User ID in the User ID field.
Enter a password associated with a guest’s User ID
Re-enter the password again to confirm it.
Figure 4-37 User Setting 1
To Next Page
Loading...
Need help?
General
