Kenwood DDX394 User Manual

14
DISCS DISCS
Playing a disc
• If a disc does not have a disc menu, all tracks on
it will be played repeatedly until you change the
source or eject the disc.
• For playable disc types/file types, see page 86.
❏ Inserting a disc
Insert a disc with the label side facing up.
DDX7051BT/
DDX794/
DDX774BH
DDX751WBTL
DDX594/DDX574BH/
DDX394
DDX517BT/DDX417BT
The source changes to “DISC” and playback starts.
• The IN indicator lights up while a disc is inserted.
• If “ ” appears on the screen, the unit cannot
accept the operation you have tried to do.
– In some cases, without showing “ ,”
operations will not be accepted.
• When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.
❏ Ejecting a disc
DDX7051BT/DDX794/
DDX774BH
DDX751WBTL
DDX594/DDX574BH/
DDX517BT/DDX417BT/
DDX394
• When removing a disc, pull it horizontally.
• You can eject a disc when playing another AV
source.
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from dust.
Closing the monitor panel (only for DDX7051BT/
DDX794/DDX774BH/DDX751WBTL )
After removing the disc, press M on the monitor
panel. The monitor panel closes.
Playback operations
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page65.
❏ Indications and buttons on the source
control screen
For video playback
312
567
4
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
1 Media type
2 Playback status
3 Current playback item information (title no./
chapter no./folder no./file no./track no.)
4 Playing time
5 IN indicator
6 Playback mode (Page17)
7 File type
2017DDX-EntryK.indb142017DDX-EntryK.indb14 2016/10/3113:122016/10/3113:12

Kenwood DDX394 Specifications

General

Brand	Kenwood
Model	DDX394
Category	Car Receiver
Language	English