62
SETTINGSSETTINGS
Sound adjustment
❏ Using the sound equalization
• The adjustments are memorized for each source
until you adjust the sound again. If the source is
a disc, the adjustments are stored for each of the
following categories.
– DVD/VCD
–CD
– DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC/
FLAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1 Display the <Equalizer> screen.
On the Home screen:
2 Select a sound mode.
• You can also display the <Equalizer> screen by
pressing [ ] on the source control screen.
* Only for DDX7051BT/DDX751WBTL/DDX517BT/DDX417BT.
Storing your own adjustments—Adjusting the
sound precisely
1 Select a sound mode. (See the left column.)
2 Select a band and adjust the level of the
selected band.
• You can adjust the level by dragging the slider
or using [J]/[K].
• Repeat this step to adjust the level of other
bands.
The adjustments are stored and <User> is
activated.
3 Adjust the sound.
<Q factor> Adjusts the width of the
frequency.
<Bass EXT> Activates ([ON])/deactivates
([OFF]) bass.
<SW LEVEL> Adjusts the subwoofer level.*
• To apply the adjusted equalizer to all playback
sources, press [ALL SRC], then press [OK] to
confirm.
• To clear the adjustment, press [EQ INIT].
* Not adjustable when <None> is selected for subwoofer on the
<Speaker Select> screen. (Page63)
2017DDX-EntryK.indb622017DDX-EntryK.indb62 2016/10/3113:122016/10/3113:12
To Next Page
Loading...
Need help?
General
