ENGLISH
21
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Audio Settings
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
(or using the remote control)
1 Press AUD to enter
[AUDIO CONTROL]
.
2 Press J / K to select an item, then press ENT IW.
To return to the previous setting item, press
.
Default: [XX]
[AUDIO CONTROL]
[SUB-W LEVEL]
[LEVEL –50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer output
level.
[EASYEQ]
Adjusts your own sound settings.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [MANUAL EQ].
[SW]: [LEVEL –50] to [LEVEL +10] (Default: [LEVEL 0]
[BASS]: [LEVEL –9] to [LEVEL +9] [LEVEL +1]
[MID]: [LEVEL –9] to [LEVEL +9] [LEVEL -6]
[TRE]: [LEVEL –9] to [LEVEL +9] [LEVEL +3])
[MANUAL EQ] Adjusts your own sound settings for each source.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [EASYEQ].
[62.5HZ] [LEVEL]
[LEVEL–9] to [LEVEL+9] ([LEVEL+5]): Adjusts
the level to memorize for each source.
(Before making an adjustment, select the source
you want to adjust.)
[BASS EXTEND]
[ON]: Turns on the extended bass. ; [OFF]: Cancels.
[100HZ]/[160HZ]/
[250HZ]/[400HZ]/
[630HZ]/[1KHZ]/
[1.6KHZ]/[2.5KHZ]/
[4KHZ]/[6.3KHZ]/
[10KHZ]/[16KHZ]
Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
[100HZ]: [LEVEL –9] to [LEVEL +9] (Default: [LEVEL +1]
[160HZ]: [LEVEL –9] to [LEVEL +9] [LEVEL 0]
[250HZ]: [LEVEL –9] to [LEVEL +9] [LEVEL -1]
[400HZ]: [LEVEL –9] to [LEVEL +9] [LEVEL -2]
[630HZ]: [LEVEL –9] to [LEVEL +9] [LEVEL -3]
[1KHZ]: [LEVEL –9] to [LEVEL +9] [LEVEL -6]
[1.6KHZ]: [LEVEL –9] to [LEVEL +9] [LEVEL -3]
[2.5KHZ]: [LEVEL –9] to [LEVEL +9] [LEVEL -2]
[4KHZ]: [LEVEL –9] to [LEVEL +9] [LEVEL -4]
[6.3KHZ]: [LEVEL –9] to [LEVEL +9] [LEVEL +4]
[10KHZ]: [LEVEL –9] to [LEVEL +9] [LEVEL +3]
[16KHZ]: [LEVEL –9] to [LEVEL +9] [LEVEL +7])
[Q FACTOR]
[1.35]/[1.50]/[2.00]: Adjusts the quality factor.
[PRESET EQ]
[NATURAL]/[ROCK]/[POPS]/[EASY]/[TOP40]/[JAZZ]/[POWERFUL]/
[USER]: Selects a preset equalizer suitable to the music genre.
(Select [USER] to use the settings made in [EASY EQ] or
[MANUALEQ].)
[BASS BOOST]
[LEVEL1] to [LEVEL5]: Selects your preferred bass boost level. ;
[OFF]: Cancels.
[LOUDNESS]
[LEVEL1]/[LEVEL2]: Selects your preferred low or high frequencies
boost to produce a well-balanced sound at low volume. ;
[OFF]: Cancels.
JS_KWD_DPX_M3200BT_MN_EN00.indd 21JS_KWD_DPX_M3200BT_MN_EN00.indd 21 9/11/2019 3:52:19 PM9/11/2019 3:52:19 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
