Kenwood DPX-M3200BT User Manual

ENGLISH
29
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Installation/Connection
Installing the unit (in-dash mounting)
Install onto the car brackets using the supplied screws (C) or (D). The
screw holes differ depending on the model of the cars.
Do the required wiring.
(Page 30)
Dashboard of your car
Car bracket*
* Only for illustration purpose.
Installing in Toyota cars
Install onto the car brackets using the supplied screws (C) or (D). Use
the mounting holes (
) or ( ) that fit the car brackets. Then, install the
supplied trim plate (A).
Do the required wiring.
(Page 30)
Dashboard of your car
Car bracket*
* Only for illustration purpose.
Use only the specified screws. Using wrong screws
might damage the unit.
JS_KWD_DPX_M3200BT_MN_EN00.indd 29JS_KWD_DPX_M3200BT_MN_EN00.indd 29 9/11/2019 3:53:26 PM9/11/2019 3:53:26 PM

Kenwood DPX-M3200BT Specifications

General

USB version	2.0
ISO connector	Yes
Bluetooth range	10 m
Bluetooth version	4.2
Bluetooth profiles	A2DP, AVRCP, PBAP
Line outputs (RCA)	2
USB ports quantity	1
DIN size	2 DIN
Impedance	40 Ω
Clock mode	24h
Output power	50 W
Product color	Black
Volume control	Touch
Frequency range	30 - 15000 Hz
Disc types supported	-
Audio output channels	4.0 channels
Signal-to-Noise Ratio (SNR)	40 dB
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Display type	LCD
On Screen Display (OSD) languages	DUT, ENG, ESP, FRE
Cables included	DC
Operating temperature (T-T)	-10 - 60 °C
FM band range	87.5 - 108 MHz
LW band range	153 - 279 kHz
Supported radio bands	FM, LW, MW
Preset stations quantity	24

Weight and Dimensions

Depth	158 mm
Width	182 mm
Height	111 mm
Weight	1700 g