ENGLISH
31
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Connect external components
No Part
1
Learning steering remote control (Page 27)
2
Output terminals (See the following “Connect external amplifiers via output
terminals”.)
3
Microphone input jack (Page 15)
Connect external amplifiers via output terminals
When connecting an external amplifier to the output terminals of this unit,
securely connect the amplifier ground wire to the car chassis to prevent
damage to the unit.
Output terminals 2-way crossover 3-way crossover
FRONT: Front output Mid Range output
REAR/SW: Rear/subwoofer output Woofer output
Installation/Connection References
Maintenance
Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
More information
For: – Latest firmware updates and latest compatible item list
– KENWOOD original application
– Any other latest information
Visit <www.kenwood.com/cs/ce/>.
Playable files
• For USB mass storage class device:
MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac)
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed above, playback may be impossible
depending on the types or conditions of media or devices.
• For detailed information and notes about the playable audio files,
visit <www.kenwood.com/cs/ce/audiofile/>.
About USB devices
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A.
JS_KWD_DPX_M3200BT_MN_EN00.indd 31JS_KWD_DPX_M3200BT_MN_EN00.indd 31 8/9/2019 10:07:04 AM8/9/2019 10:07:04 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
