EasyManuals Logo

Kenwood DPX-M3200BT User Manual

Kenwood DPX-M3200BT
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
ENGLISH
35
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Symptom Remedy
Bluetooth®
Voice calling method is not
successful.
Use voice calling method in a more quiet environment.
Reduce the distance from the microphone when you
speak the name.
Make sure the same voice as the registered voice tag is
used.
Sound is being interrupted or
skipped during playback of a
Bluetooth audio player.
Reduce the distance between the unit and the Bluetooth
audio player.
Turn off, then turn on the unit and try to connect again.
Other Bluetooth devices might be trying to connect to the
unit.
The connected Bluetooth
audio player cannot be
controlled.
Check whether the connected Bluetooth audio player
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
Disconnect and connect the Bluetooth player again.
“NOT SUPPORT” The connected phone does not support Voice Recognition
feature or phonebook transfer.
“NO ENTRY”/“NO PAIR” There is no registered device connected/found via
Bluetooth.
“ERROR” Try the operation again. If “ERROR” appears again, check
if the device supports the function you have tried.
“NO INFO”/“NO DATA” Bluetooth device cannot get the contact information.
“HF ERROR XX”/
“BT ERROR”
Reset the unit and try the operation again. If this does not
solve the problem, consult your nearest service center.
“SWITCHING NG” The connected phones might not support phone
switching feature.
The Bluetooth connection
between the Bluetooth
device and the unit is
unstable.
Delete the unused registered Bluetooth device from the
unit. (Page 19)
Troubleshooting Specifications
Tuner
FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz step)
Usable Sensitivity
(S/N = 30 dB)
8.2 dBf (0.71 μV/75 Ω)
Quieting Sensitivity
(DIN S/N = 46 dB)
17.2 dBf (2.0 μV/75 Ω)
Frequency Response (±3 dB) 30 Hz — 15 kHz
Signal-to-Noise Ratio (MONO) 64.0 dB
Stereo Separation (1 kHz) 40 dB
AM Frequency Range Band 1 (MW) 531 kHz — 1 602 kHz
(9 kHz step)
Band 2 (SW1) 2 940 kHz — 7 735 kHz
(5 kHz step)
Band 3 (SW2) 9 500 kHz — 10 135 kHz/
11 580 kHz — 18 135 kHz
(5 kHz step)
Channel Space Selection Band 1 9 kHz
Band 2/3 5 kHz
Usable Sensitivity
(S/N = 20 dB)
MW 29.0 dBμ (28.2 μV)
SW 30 dBμ (32 μV)
USB
USB Standard USB 1.1, USB 2.0 (High speed)
File System FAT12/16/32
Maximum Supply Current DC 5 V
1.5 A
Frequency Response (±1 dB) 20 Hz — 20 kHz
JS_KWD_DPX_M3200BT_MN_EN00.indd 35JS_KWD_DPX_M3200BT_MN_EN00.indd 35 8/9/2019 10:07:05 AM8/9/2019 10:07:05 AM

Table of Contents

Other manuals for Kenwood DPX-M3200BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood DPX-M3200BT and is the answer not in the manual?

Kenwood DPX-M3200BT Specifications

General IconGeneral
USB version2.0
ISO connectorYes
Bluetooth range10 m
Bluetooth version4.2
Bluetooth profilesA2DP, AVRCP, PBAP
Line outputs (RCA)2
USB ports quantity1
DIN size2 DIN
Impedance40 Ω
Clock mode24h
Output power50 W
Product colorBlack
Volume controlTouch
Frequency range30 - 15000 Hz
Disc types supported-
Audio output channels4.0 channels
Signal-to-Noise Ratio (SNR)40 dB
Audio formats supportedAAC, FLAC, MP3, WAV, WMA
Display typeLCD
On Screen Display (OSD) languagesDUT, ENG, ESP, FRE
Cables includedDC
Operating temperature (T-T)-10 - 60 °C
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
Supported radio bandsFM, LW, MW
Preset stations quantity24
Weight and Dimensions IconWeight and Dimensions
Depth158 mm
Width182 mm
Height111 mm
Weight1700 g

Related product manuals