Kenwood TK-3180 User Manual

23
TRANSMITTING A STATUS MESSAGE
Status messages can contain up to 16 alphanumeric
characters. To transmit a Status message:
1
Select your desired zone and channel.
2
Press the key programmed as
Status
to enter Status Mode
or
Selcall + Status
to enter Selcall Mode.
• When using the
Status
key to enter Status Mode, the station
ID is fixed and cannot be selected. Skip to step 5 to continue.
3
In Selcall Mode, rotate the selector or press the
<B
and
C>
keys to select the ID of the station you want to call.
• Alternatively, you can enter a station ID using the DTMF
keypad.
• If Manual Input Mode is enabled, you can enter digits by using
the DTMF keypad or by selecting digits with the selector. To
enter Manual Input Mode, press and hold the
S
key. When
using the selector, rotate it to select a digit. The cursor can be
shifted to the left or right by pressing the
<B
or
C>
key. Repeat
this process until the entire ID is entered.
4
Press the
S
key to enter Status Mode.
5
Rotate the selector or press the
<B
and
C>
keys to select
the status ID you want to transmit.
• Alternatively, you can enter the status ID using the DTMF
keypad.
• If manual input mode is enabled, you can enter digits by using
the DTMF keypad or by selecting digits with the selector. To
enter manual input mode, press and hold the
S
key. When
using the selector, rotate it to select a digit. The cursor can be
shifted to the left or right by pressing the
<B
or
C>
key. Repeat
this process until the entire ID is entered.
6
Press the
Call 1
to
Call 6
key to initiate the Status call.

Kenwood TK-3180 Specifications

General

Brand	Kenwood
Model	TK-3180
Category	Transceiver
Language	English