30
DTMF (DUAL TONE MULTI FREQUENCY) CALLS
MANUAL DIALING
■
METHOD 1
Press and hold the
PTT
switch, then enter the desired digits
using the front panel keypad.
• If you release the
PTT
switch, transmit mode will end even if
the complete number has not been sent.
• If your dealer has activated the Keypad Auto PTT function,
you need not press the
PTT
switch while entering digits. The
DTMF code will be sent automatically when you press a key.
■
METHOD 2
Enter the desired digits using the front panel keypad
(maximum of 30 digits). After entering the complete
number, press the
PTT
switch.
• The DTMF code is transmitted after pressing the
PTT
switch.
Note:
Switching OFF the transceiver power clears the number.
AUTODIAL
Autodial allows you to store and quickly recall 32 names (up to
12 characters per name) and DTMF numbers (up to 16 digits
per number).
REDIAL
1
To redial the last called number, press the key programmed
as
Autodial
.
• The first entry in the Autodial list appears on the display.
2
Press the key followed by the
0
key to display the last
called number.
3
Press the
PTT
switch to make the call.
Note:
Switching OFF the transceiver power clears the redial
memory.
To Next Page
Loading...
Need help?
General
