40
BATTERY POWER INDICATOR
The battery power indicator displays the battery power
remaining, as illustrated below:
High
Sufficient
Low
Very low (flashing)
When the battery power is very low, replace or recharge the
battery pack. If activated by your dealer, an alert tone will
sound every 30 seconds and the LED indicator will blink red
when the battery power is low.
SIGNAL STRENGTH INDICATOR
The signal strength indicator displays the strength of received
calls:
Strong signal
Medium signal
Weak signal
Very weak signal
BEGINNING/ END OF TRANSMIT SIGNAL
The Beginning of Transmit and End of Transmit identification
signals are used to access and release some repeaters.
If Beginning of Transmit is set, the ID signal is transmitted
when you press the
PTT
switch.
If End of Transmit is set, the ID signal is transmitted when you
release the
PTT
switch.
If both are set, the ID signal is transmitted when you press and
release the
PTT
switch.
To Next Page
Loading...
Need help?
General
