24
RECEIVING SELCALLS AND STATUS MESSAGES
When you receive a signal containing the correct tones,
squelch opens and you will hear the call.
• The LED indicator flashes orange.
• To mute the speaker after squelch opens, press the key
programmed as
Monitor
.
• Your dealer can program the monitor function to close again after a
specific time period elapses.
• If Transpond for 5-tone Signaling is programmed, an
acknowledgment signal is returned to the calling station.
• If Call Alert for 5-tone Signaling is programmed, an alert tone will
sound when the correct tones are received.
• Your dealer can program the transceiver to display the received
Selcall/Status.
To respond to the call, press the
PTT
switch and speak into the
microphone.
To Next Page
Loading...
Need help?
General
