STOP PH2 PH1 OPEN CLOSE PAR SBS
EDGE
PH2
PH1
ON
SHIELD
ANT
LS 1
LS 2
COM
BATTERIES
24VAC
24VAC-
NEG
PHPOW
PH2
PH1
OPEN
CLOSE
SBS
PAR/EDGE
COM
COM
FLASH
IND/ELEC
LED
POWER
SUPPLY
M -
M +
NEG
ENC
V+
2.3 - Models and technical characteristics
2.2 - Description of the connections
2.1 - Description of the control unit
20
EN
The CT10324 control unit is the most modern, ecient system for
the control of Key Automation motors for the electric opening and
closure of sliding gates and up-and-over doors.
All other, improper, use of the control unit is forbidden.
1- Motor power supply (M+ and M-)
2- Transformer power supply connector
3- Connection of ash light, courtesy light, gate open indicator
light/electic lock
4- 24 Vac connector for control and safety devices
5- 24 Vdc unregolated for safety device (photocell and radio edge)
6- Safety input connectior for STOP or edge and photocell
7- Connector for control devices
8- EDGE/STOP, PH2, PH1 safety red LED; OPEN, CLOSE, PAR,
SBS input green LED
9- Safety override dip switch
10- Limit switch connector
11- Limit switch red LED indicators
12- Connector for battery charger KBP/KBPN
13- Fuse 1.6 AT time lag
14- Function display 5 digit 14 segment
15- STEPPING SBS button (
)
16- UP (
) button
17- MENU (
) button
18- DOWN (
) button
19- KEY LED indicator
20- Antenna
21- SBK: predisposition for energy saving module when control
unit is not active (optional)
22- Connector for KUBE interface / PowerBus (optional)
23- Input for encoder (only for up-and-over-door)
2 - INTRODUCING THE PRODUCT
CODE DESCRIPTION
CT10324 24V control unit for sliding gates or up-and-over doors
1
23
12
20
2
10
8
4
9
14
19
11
16
15
18
17
13
3
21
22
5 6 7
The CT10324 has a display with 5 digit and 14 segments that allows
easy programming and constant monitoring of the input status; the
menu structure also allows easy setting of working times and ope-
rating modes.
To Next Page
Loading...
Need help?
General
