Kioti DK40 User Manual

5-26 DK35/40/450L
SELECT REAR BALLAST CAREFULLY
Add weight to rear wheels if needed to
improve traction or for stability. Amount
of rear ballast should be matched to job
and ballast should be removed when it
is not needed. Rear wheel weights are
available or liquid may be added to the
tires. Consult your
DAEDONG Dealer for
the correct ballasting necessary for your
particular application.
CAUTION
Additional ballast may be needed
for transporting heavy integral
implements. When implement is
raised, drive slowly over rough
ground, regardless of how much
ballast is used.
25kg X 2 Pieces
(55.1 lbs. X 2Pieces)
Maximum weight
per wheel

Kioti DK40 Specifications

General

Engine Power	40 hp
Hydraulic System	Open center
Drive	4WD
PTO Type	Independent
Ground Clearance	13.4 inches
3-Point Hitch Category	Category I
Height	92.5 inches
Transmission	Synchro Shuttle