43
NOTE: With the exception of changing the main jet, no adjustments, modifications, or other
maintenance is permitted on EPA and CARB certified engines. This includes any Kipor generator
ever sold in North America. This drawing is for information only. Kipor will not supply any
carburetor parts other than stepping motors and main jets
6.3 Inspection
● Float height
Place the carburetor on a level surface as shown; measure the float height between the float and
carburetor block.
Height 12mm
Replace the carburetor if the float height is not correct.
浮子
12
Float
To Next Page
Loading...
Need help?
General
