Kodak ESP 7 ALL-IN-ONE PRINTER User Manual

Maintaining Your Printer
60 Kodak ESP 7 Printer User Guide
Cleaning the scanner glass
For good copies and scans, ensure the printer's scanner glass and lid backing are clean;
dust the exterior as needed.
1 Unplug the printer and raise the lid.
2 Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass
cleaner.
3 Dry the glass with a lint-free cloth.
4 When finished cleaning, plug in the printer.
Cleaning the scanner lid
Minor debris can accumulate on the document backing located underneath the scanner lid
of the Kodak printer.
Warning: Do not use abrasives, acetone, benzene, or carbon tetrachloride on the
glass, as they can damage it. Do not place or spray liquid directly on the glass. The
liquid might seep under the glass and damage the device.
Warning: Do not use paper-based wipes, as these might scratch the underside of
the scanner lid. Do not use harsh or abrasive cleaners or organic solvents on the
printer or any of its parts.

Kodak ESP 7 ALL-IN-ONE PRINTER Specifications

General

Brand	Kodak
Model	ESP 7 ALL-IN-ONE PRINTER
Category	All in One Printer
Language	English