Troubleshooting
80 Kodak ESP 7 Printer User Guide
Corrective Action
Configure the printer to print the document first-page first.
To set a Macintosh to print the first page of a document first:
1 On the File menu, select
Print.
2 On the Print dialog, select
Paper Handling.
3 Select the
Normal Page Order option.
PictBridge camera not detected
Probable Cause
The camera is not communicating with the printer.
Corrective Action
• Make sure the camera is turned on.
• Check the USB connections from the PictBridge camera to the printer.
• If disconnected, reconnect the USB cable from the PictBridge camera to the printer.
• Make sure the connected camera is PictBridge-compatible. See your camera or device
user’s guide for details.
• Check the camera batteries.
Picture cropped
• Change the picture quality setting (or resolution) on your digital camera to 3:2. See your
camera user’s guide for details.
• Adjust cropped photos using the Kodak Home Center software (Windows only) or
other image editing software on your computer.
• If you are printing from an application on your computer, select the proper paper size
from the printer options.
Picture print smudged
Probable Cause
Fingerprints are on the glossy side of paper.
Corrective Action
Handle paper by the edges.
Note: Cropping may vary, depending on the selected picture size and size of the
output paper.
The dimensions of the photo on the camera are slightly different
from each paper size so a portion will be cropped to fit perfectly on whatever paper
size was selected.
To Next Page
Loading...
Need help?
General
