Introduction
This manual provides operation and maintenance instructions for the DC (direct current) variable speed model 6VSG generator
sets equipped with Kohler VSC generator set controllers.
This generator set is approved for use in stationary applications in locations served by a public utility, photovoltaic cells, wind
turbines or any combination of power sources tied to a battery bank. Have the generator set installed by an authorized
distributor/dealer or service technician. Refer to Installation Manual, for installation instructions.
Information in this publication represents data available at the time of print. Kohler Co. reserves the right to change this
publication and the products represented without notice and without any obligation or liability whatsoever.
Read this manual and carefully follow all procedures and safety precautions to ensure proper equipment operation and to avoid
bodily injury. Read and follow the Safety Precautions and Instructions section at the beginning of this manual. Keep this manual
with the equipment for future reference.
The equipment service requirements are very important to safe and efficient operation. Inspect the parts often and perform
required service at the prescribed intervals. Obtain service from an authorized service distributor/dealer to keep equipment in
top condition.
Figure 1 6VSG Generator Set
List of Related Literature
Figure 2 identifies related literature available for the generator sets covered in this manual. Only trained and qualified personnel
should install or service the generator set.
To Next Page
Loading...
Need help?
General
