EasyManuals Logo
Home>Kohler>Portable Generator>6VSG

Kohler 6VSG User Manual

Kohler 6VSG
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
TP-6843 12/21 23
2.4.4 Engine Cooldown
The engine cooldown time delay allows the engine to run after the loads have been removed.
The engine cooldown time delay is set to 5 minutes. The engine stops before the cooldown time delay expires if the temperature
drops below the cooled-down temperature level, or if the temperature rises above the high limit during the cooldown cycle.
2.4.5 Automatic Operation
The 6VSG monitors the voltage of a storage battery bank connected to (+) and () of the output block to determine charge
condition of the storage battery (see Figure 10).
If the storage battery voltage falls below the minimum voltage for more than 3 minutes, or if a remote start command is received,
the generator set starts. A remote start command can be activated by closing the remote start contacts across 3 and 4 or by a
start exercise command.
When the generator set load falls below the minimum % load for more than 3 minutes, or a remote stop command is received,
the generator set stops. A remote stop command can be caused by opening the remote start contacts across 3 and 4 or by the
exercise time ending.
The minimum voltage, minimum load, and time delays are adjustable using a personal computer and Kohler
®
SiteTech™
software. Contact your Kohler distributor.
Figure 10 Output Block
Positive (+)
Negative ()

Table of Contents

Other manuals for Kohler 6VSG

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kohler 6VSG and is the answer not in the manual?

Kohler 6VSG Specifications

General IconGeneral
BrandKohler
Model6VSG
CategoryPortable Generator
LanguageEnglish

Related product manuals