Kohler KD1750 Operation

TP-7070 8/20 79Section 4 Accessories
4.4.3 Thermocouple Input Module
Up to three thermocouples can be connected to the
Thermocouple Module. Type K or PT100
thermocouples can be connected. See Figure 4-10 for
thermocouple specifications. See Figure 4-12 and
Figure 4-13 for connections.
Medium voltage (larger than 600 volts) units are
equipped with two thermocouple modules with the
settings shown in Figure 4-11.
Temperature data can be viewed using the Custom View
button on the controller. See Section 2.7.5. If no
thermocouple modules are installed, all temperatures
will display 32F (0C). If nothing is connected to a
channel on a thermocouple module, - 58F (- 50C) is
displayed.
Thermocouple
Type
Temperature
Range Connection
PT100
0 - 200C
(32 - 392F)
0.75 to 1.5 mm
2
K Thermocouple
- 20 - 1000C
(- 4 - 1832F)
0.75 to 1.5 mm
2
Figure 4-10 Thermocouple Types and Connections
Thermocouple Module 1 Thermocouple Module 2
Phase A Temp Front Bearing Temp
Phase B Temp Rear Bearing Temp
Phase C Temp User PT100 Temp
Figure 4-11 Thermocouple Module Default Settings
for Medium Voltage Generators
1
2
31613391201/301/401
1. Factory connections or settings
2. Thermocouple connections 0 - 2, Type K or PT100
Figure 4-12 Thermocouple Module
24V
1
2
3
4
2
3
+
+
+
+
-
-
-
-
24VDC Power Supply
(9 - 40 VDC)
31613391201
0 - 20 mA
PT100
K
2XGround
Shielding Connection
Note: Cable shields must be grounded as shown.
Figure 4-13 Connections

Kohler KD1750 Specifications

General

Brand	Kohler
Model	KD1750
Category	Inverter
Language	English