.
ATTACHMENTS, OPTIONS
TACHOGRAPH (TCO 15-6)
INSTRUMENT LOCK
This (1) can be used for the instrument lock key when replacing the charts, or for operator change identification keys
1 and 2.
CLOCK DIAL
One line here (2) indicates one minute.
CLOCK OPERATION CONFIRMATION APERTURE
It is possible to check the action of the second hand with this (3) when the clock is working.
SPEED SCALE
This (4) is the scale for the machine travel speed.
SPEED INDICATOR
This (5) indicates the machine travel speed.
SPEED WARNING LAMP
When the machine exceeds the maximum set speed, the lamp (6) lights up to warn the operator.
Models with the speed warning lamp do not have the speed indication confirmation lamp.
SPEED INDICATION CONFIRMATION LAMP
This lamp (7) is interconnected with the speedometer and is used to confirm the speed indication. When using the
confirmation switch to light up the confirmation lamp during checks before starting, always check for any
disconnection in the three indication confirmation lamps.
Models with the speed warning lamp do not have the speed indication confirmation lamp.
ODOMETER
This meter (8) displays the total distance (km) traveled by the machine.
PERIOD INDICATING LABEL
This label (9) indicates that it is for 7 days.
SPEED RECORDING STYLUS
This (10) records the momentary speed of the machine on the chart.
OPERATOR CHANGE RECORDING STYLUS
When the operator change key is used, the operator change is recorded on the chart (11).
TRAVEL DISTANCE RECORDING STYLUS
This (12) records the distance travel by the machine on the chart. One up-and-down recording motion is 10 km.
ADJUSTMENT SCREW FOR SPEED WARNING LAMP
The speed at which the lamp gives a warning can be set as desired with this screw (13).
SPEED CONFIRMATION APERTURE FOR SPEED WARNING LAMP INDICATION
This (14) is the speed indication aperture for setting the desired speed.
6 - 16
To Next Page
Loading...
Need help?
General
