.
ATTACHMENTS, OPTIONS
REVO TACHOGRAPH (TCO 15-7)
CHART SUPPORT
This (16) is the rotating part of the clock and has teeth to prevent the chart from slipping.
PRESSING RING
This ring (17) is a ring that presses the chart and holds it against the chart support.
CUTTING KNIFE
This knife (18) cuts the tape connecting the charts.
INSTRUMENT LIGHTING LAMP
This lamp (19) is used for light up the instrument.
NAME PLATE
This (20) indicates the type and model.
VOLTAGE INDICATION LABEL
This label (21) indicates the voltage.
RPM RECORDING STYLUS
This (22) records the momentary engine speed on the chart.
ADJUSTMENT SCREW FOR RPM WARNING LAMP
The speed at which the lamp gives a warning can be set as desired with this screw (23).
SPEED CONFIRMATION APERTURE FOR RPM WARNING LAMP INDICATION
This (24) is the speed indication aperture for setting the desired speed of revolution.
TOTAL REVOLUTION COUNTER
This meter (25) indicates the total number of revolutions (x 1000) of the engine.
6 - 22
To Next Page
Loading...
Need help?
General
