Komatsu PC4000 - Mounting of Hydraulic Oil Tank

Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005
35
3.5. Mounting of Hydraulic Oil Tank (Z23039)
1. Lift the Hydraulic Oil Tank.
Lifting eyes are delivered with the machine.
2. Align the Hydraulic Oil Tank with the superstructure.
3. Lower the Hydraulic Oil Tank fully down and install all bolts.
Tighten the bolts with the resp. torque.
(Refer to section 4.12 of the Maintenance Manual).
4. Remove transport cover and install cover with breather filters (67).
8 bolts M8 with lock washers.
Tightening torque 21 Nm.
5. Connect all hoses, pipes and electric cables.
6. Connect the Suction Tank with the Hydraulic Oil Tank.